Fluid Metering Inc Lab Metering Pump Model QD Cerampump

FMI Pumps QD Series, industrial chemical pump is Ideal for general lab and industrial use. Featuring high speeds and high flow rates up to 2208 mL/min in either direction.

FMI Pumps feature the patented CeramPump® valveless piston pumping technology. The CeramPump® positive displacement design has one moving part in the fluid path, a sapphire-hard ceramic piston to perform all fluid control functions.

The elimination of valves minimizes downtime or the need for re-calibration and our long term drift-free performance delivers millions of “trouble-free” cycles at 1% precision or better.

Industrial Chemical Pump Features

Flow rate infinitely adjustable from 0 to 2208 mL/min in either direction

No valves to clog, hang up or service

Ceramic and fluorocarbon standard wetted materials

One moving part – piston

Drift-free performance

Flow rate infinitely adjustable up to max flow rate in either direction

Convenient multi-position tilt stand for wall or counter mounting

Rugged, long life, fan cooled, thermally protected, ball bearing motor

Optional: Available with Wash Glands as shown

*GENERAL SPECIFICATION NOTES FOR ALL PUMPS

1. Physical characteristics of your pumped fluid may affect the rating/capacity relationships shown in the performance tables for each FMI pump.

2. The maximum flow rates shown in the tables are for H2O at 2 psig.

3. Flow rates are infinitely variable from zero to maximum capacities shown.

4. Pumping capacities are reduced approximately 18% when the Pump Drive Module is operating on a 50 Hz electrical supply.

5. Fluorocarbon cylinder cases (Q line only) are rated for a maximum pressure of 60 psig or the lower pressure shown in the charts.

6. 3/8″ I.D. tubing or greater is required for flows higher than 500 mL/min.

7. 1/2″ I.D. tubing or greater is required for flows higher than 1200 mL/min