Edwards E2M28 or E2M30 Rotary Vane Vacuum Pump (used/rebuilt)


All pumps are fully rebuilt and tested to pull around 30-40micron on a cold start. Performance expected to be better after 12 hours warm up.


The pump is designed for reliable, long‑term operation.
Thermal overload device prevents overheating (single phase only).
The drive is provided through a flexible coupling by a single‑phase or three‑phase (four pole) motor.
The motors are totally enclosed and are cooled by the motor cooling fan.
Full height O ring sealed oil sight glass for easy checking of oil level and condition.
Large sight glass and operating oil range.
Motor: 1 Phase 115/220V


All Edward pumps come with 60 days warranty. Degraded performance due to feeding dirt or solvent inside the pump is not covered by the warranty.


Technical Data (when brand new)

Displacement (swept volume)
50 Hz32.2 m3h-1 / 19 ft3min-1
60 Hz38.9 m3h-1 / 22.3 ft3min-1
Speed (Pneurop 6602)
50 Hz27.5 m3h-1 / 16.2 ft3min-1
60Hz33.0 m3h-1 / 19.5 ft3min-1
Ultimate vacuum (total pressure)
without gas ballast1 x 10-3 mbar / 7.5 x 10-4 Torr
with gas ballast1.5 x 10-2 mbar / 1.1 x 10-2 Torr
with Fomblin®1 x 10-2 mbar / 7.5 x 10-3 Torr
Inlet connectionNW25 flange
Outlet connection**Nozzle 15 mm external Ø removable from 3/4 in BSP tapped hole
Max allowed pressure at outlet0.5 bar gauge / 7 psig
Max inlet pressure for water vapour30 mbar / 23 Torr
Max water vapour pumping rate0.7 kg h-1
Operating temperature range13 – 40 °C
Nominal rotation speed1440 / 1720 rpm
Motor power 50 Hz0.75 kW
Motor power 60 Hz0.90 kW
Power Connector 1-ph*IEC EN60320 C19
Weight44 kg / 97 lbs
Noise57 dB(A) @ 50 Hz
Oil capacity - max1.5 litre
Oil capacity - min1.2 litre
Recommended oil (supplied)Ultragrade 19


Technology

The motor is totally enclosed and is cooled by the motor-cooling fan which directs air along the motor fins. The motors are fitted with a thermal overload device. When the motor is too hot, the thermal overload device switches off the pump. The thermal overload device has an automatic reset; when the motor cools down, the device resets and the motor will restart.
 
An oil pressure system lubricates the pump shaft bearing surfaces and rotor sealing faces. The pump has an oil distribution valve which prevents discharge of oil to the pump interior (suckback) after the pump stops. The pumping chambers are air-tight, so this arrangement prevents oil suckback unless the gas ballast valve is open.
 
You can inspect the level and condition of oil in the oil box reservoir through the oil sight-glass. An oil filler-plug is fitted to the top of the oil box. The pump has two oil drain-plugs to allow either gravity oil drain or pressure oil drain.

Applications

  • Analytical instruments - LCMS
  • Automotive
  • Beam lines and high energy physics
  • Centrifuges, ultra-high speed
  • Coating
  • Cryogenics
  • Degassing/curing - oil, epoxy resin
  • Distillation/extraction/filtration
  • Freeze drying
  • Furnaces
  • Gas bottle filling/emptying
  • Gel drying
  • Glove boxes, ovens
  • Laboratory bench top vacuum
  • Lasers, gas recovery and re-circulation
  • Leak detectors, Helium
  • Load locks and transfer chambers
  • Refrigeration manufacture
  • Rotary, centrifugal evaporators
  • Solvent recovery
  • Surface science instruments
  • Turbomolecular backing pumps

    Mist filter optional

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

Edwards E2M28 or E2M30 Rotary Vane Vacuum Pump (used/rebuilt)

  • Brand: LabCradle
  • Product Code:E2M28u
  • Reward Points:1
  • Availability:In Stock
  • US$ USDT 1,554.00
  • US$ USDT 1,405.99

  • Price in reward points:10

Available Options


Related Products

UltraGrade 19 Vacuum Pump Oil 4L /1 gallon 20L / 5 gallon

UltraGrade 19 Vacuum Pump Oil 4L /1 gallon 20L / 5 gallon

UltraGrade 19 Vacuum Pump Oil4-20L / 1-5 gallonOil is suitable for most vacuum pumps including Edwar..

US$ USDT 110.99

KF25 or KF40 Clamp for Vacuum Pump

KF25 or KF40 Clamp for Vacuum Pump

KF25 or KF40 Clamp for Vacuum Pump (Vacuum Pump Clamp)..

US$ USDT 11.09

KF16 KF25 or KF40 O-Ring for Vacuum Pump

KF16 KF25 or KF40 O-Ring for Vacuum Pump

KF16 KF25 or KF40 O-Ring for Vacuum Pump (Vacuum Pump O-Ring)..

US$ USDT 7.40

KF25 to Hose Adapter for Vacuum Pump

KF25 to Hose Adapter for Vacuum Pump

KF25 to Hose Adapter for Vacuum Pump (Vacuum Pump KF25 to Barb Hose Adapter)..

US$ USDT 25.90

LabCradle KF25 Vacuum Hose Bellow 20cm 30cm 50cm 100cm

LabCradle KF25 Vacuum Hose Bellow 20cm 30cm 50cm 100cm

LabCradle SS304 Stainless Steel KF25 Hose Bellow 8" 12" 16" 40"/20cm 30cm 50cm 100cmFlexible St..

US$ USDT 36.99 US$ USDT 44.40

KF25 to FNPT Adapter 1/4", 3/8". 1/2"

KF25 to FNPT Adapter 1/4", 3/8". 1/2"

KF25 Vacuum to NPT Thread Adapter 1/4", 3/8" and 1/2"..

US$ USDT 14.79

Labcradle KF25 2-Way Vacuum Diaphragm Valve

Labcradle KF25 2-Way Vacuum Diaphragm Valve

Labcradle KF25 2-Way Vacuum Diaphragm Valve..

US$ USDT 110.99 US$ USDT 118.39

Tags: e2m28, edwards e2m28, short path vacuum pump, rotary vane vacuum pump price, rotary vane vacuum pump for sale, rotary vane vacuum pump, used vacuum pump for sale, Rotary Vane, Vacuum Pump, short path, short path distillation, rotary vane mechanical vacuum pump offers, buy e2m28 canada, Edwards E2M28 Rotary Vane Vacuum Pump, edwards vacuum pump, e2m28, vacuum pump, rotary vane, short path vacuum, oil vacuum,